| Author | Post |
|---|
bimmer
Member
| Joined: | Fri Sep 4th, 2009 |
| Location: | United Kingdom |
| Posts: | 478 |
| Status: |
Offline
|
| Mana: |    |
|
Posted: Thu Jul 14th, 2011 04:25 pm |
|
hi, i will get you his contact number as soon as i can and send you a PM.
|
handyman
Member
| Joined: | Thu Jul 14th, 2011 |
| Location: | |
| Posts: | 2 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Jul 14th, 2011 12:23 pm |
|
Hi Bimmer, I've just acquired a pair of DGA1800s from a defunct dealership and want to get in touch with a Sun engineer able to test, re-calibrate and repair these machines. Can you pass on details if he is in the South East? I've been told that Snap-On also offer this service.
I am a small indy, restoring and servicing older Citroen and Peugeot cars. I need to test to MOT standard, but do not need the machines to be locked into the MOT system.
Handyman
|
bimmer
Member
| Joined: | Fri Sep 4th, 2009 |
| Location: | United Kingdom |
| Posts: | 478 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Wed Apr 14th, 2010 01:36 pm |
|
hi brunty
if you dont have any luck finding spares let me know. i know the sun engineer who does our vts and he does " off the clock work " if you get my drift and can get spare parts.
|
Brunty
Member
| Joined: | Tue Apr 13th, 2010 |
| Location: | |
| Posts: | 2 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Wed Apr 14th, 2010 07:30 am |
|
Hi Wes,
I've already tried removing the filters and probe hose just for the auto cal to see if it makes any difference, but it didn't.
The guy I got it from said that it could have something to do with this "valve" that sticks out the back. Ali block with a hose passing through it and a cylinder above with an electrical connection.
If it is this, I haven't found anywhere yet that does spares...
|
Wesley
Trade Member
|
Posted: Tue Apr 13th, 2010 10:43 pm |
|
Hello Brunty,
Have a look behind the machine for any filters or water traps, they sometimes need a clean out or replacement.
Hope this helps,
wes.
|
Brunty
Member
| Joined: | Tue Apr 13th, 2010 |
| Location: | |
| Posts: | 2 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Tue Apr 13th, 2010 11:55 am |
|
Hello,
I've just got myself an old Sun MGA 1200 gas analyser. It's for private use rather than an MOT test station.
Unfortunately it comes up with HC residue error after warming up and doing a self cal.
Is there anyone that can point me in the right direction with fixing this unit up?
Thanks
Brunty
|
Current time is 01:17 pm | |
|
