| Author | Post |
|---|
cosworth
Member
|
Posted: Sun Jun 26th, 2011 07:35 pm |
|
I hate the new printer, push f2 to print wait 30 secs then it prints. Its massive and vt20's now keep jamming if loaded into the paper tray at the bottom. worked ok for the few weeks tho. but the guy who installed did say vt20's shouldnt go in the tray as they may jam. "Doh". so now it all goes in the flap bit at the front.
Ive added a pic so u can see the size
Last edited on Sun Jun 26th, 2011 07:50 pm by cosworth
|
kit1958
Trade Member
|
Posted: Sat Jun 25th, 2011 05:09 pm |
|
We have fed vt40's into bottom and only pull put feed tray for 20/30's etc to try to save a bit of room (not my idea) 
It does show how slow the main box is though!!Last edited on Sat Jun 25th, 2011 05:10 pm by kit1958
|
Wesley
Trade Member
|
Posted: Fri Jun 24th, 2011 11:41 pm |
|
sn4 2011, quotes £92.20 + vat?
the dimensions quoted are for the "box"only, and don`t advise that the cable pushes it off the wall by three inches, and until the plain paper option arrives, you have a "sheet feeder" tray that sticks out the length of the pre-printed forms.
is there a cable adapter available to allow it to be turned through 90 degrees?
"transfer rate" from "Noah`s Nephew" is "V" Slow, after that, up to and excells all expectations.
Last edited on Fri Jun 24th, 2011 11:50 pm by Wesley
|
grahaml
Member
| Joined: | Sat Feb 16th, 2008 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: |  |
|
Posted: Fri Jun 24th, 2011 11:14 am |
|
bimmer wrote: i have seen them for as much as £194 on the web and as little as £28 on e-bay.
Yes I saw them around the £200 mark, seem to be different capacity ones too!
£28 sounds a bit more like it, assume cheap copy/refill though......
|
bimmer
Trade Member
| Joined: | Thu Sep 3rd, 2009 |
| Location: | United Kingdom |
| Posts: | 500 |
| Status: |
Offline
|
| Mana: |   |
|
Posted: Fri Jun 24th, 2011 10:58 am |
|
i have seen them for as much as £194 on the web and as little as £28 on e-bay.
|
grahaml
Member
| Joined: | Sat Feb 16th, 2008 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Fri Jun 24th, 2011 10:20 am |
|
Me again!
Just to add, it is much faster I admit.
Still have to use the old pre-printed forms at the moment though.
|
grahaml
Member
| Joined: | Sat Feb 16th, 2008 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Fri Jun 24th, 2011 10:14 am |
|
Hi there
So the guy has just been in to install our new laser printer for the VTS device.
It's a Epson Aculaser M2400D!
Can any one find cheap toner cartridge for it, because I can't (only had a fairly quick look on internet I admit!)
Assume you can't send the cartridge back to VOSA for a free replacement like you could with the old dot matrix printer?!
More progress
|
Current time is 11:45 pm | Page:   1 2 |
|
