| Author | Post |
|---|
kev1975 Trade Member
| Joined: | Wed Sep 5th, 2007 |
| Location: | |
| Posts: | 755 |
| Status: |
Offline
|
| Mana: |     |
|
Posted: Wed Feb 24th, 2010 10:13 pm |
|
psychocandy wrote:
kev1975 wrote: psychocandy wrote:
Took car to Kwikfit for MOT (probably not best idea).
Failed for a few things:-
1. Headlight not secured. I know one of the fixings for the headlight
is broken but are they being overpicky here. Its definitely not loose
because 4 out of 5 bolts are still holding it.
2. Exhaust mountings. They are saying the bit that hangs on to the
rubbers has snapped off.and I need whole new exhaust. Can this be
repaired/welded or something?
I'm seriously thinking of going somewhere else and paying for another
MOT as a second opinion.
make a bracket to secure the headlight , job sorted .
exhaust bracket can be repaired any way you like as long as it is secure & supports the system , even a piece of bar fastened to the exhaust with an exhaust clamp will be fine as long as it is secure .
So as long as headlight isnt loose then it doesnt matter about original fixing being broken?
Would an independent garage normally be able to fix the exhaust clamp? Must be cheaper than a whole new exhaust?
plenty of garages carry out such repairs , there is nothing that says the headlight has to be on its original brackets , just has to be secure & aimed correctly .
exhaust bracket should be an easy enough job .
|
psychocandy Member
| Joined: | Wed Feb 24th, 2010 |
| Location: | |
| Posts: | 6 |
| Status: |
Offline
|
| Mana: |     |
|
Posted: Wed Feb 24th, 2010 08:38 pm |
|
kev1975 wrote: psychocandy wrote:
Took car to Kwikfit for MOT (probably not best idea).
Failed for a few things:-
1. Headlight not secured. I know one of the fixings for the headlight
is broken but are they being overpicky here. Its definitely not loose
because 4 out of 5 bolts are still holding it.
2. Exhaust mountings. They are saying the bit that hangs on to the
rubbers has snapped off.and I need whole new exhaust. Can this be
repaired/welded or something?
I'm seriously thinking of going somewhere else and paying for another
MOT as a second opinion.
make a bracket to secure the headlight , job sorted .
exhaust bracket can be repaired any way you like as long as it is secure & supports the system , even a piece of bar fastened to the exhaust with an exhaust clamp will be fine as long as it is secure .
So as long as headlight isnt loose then it doesnt matter about original fixing being broken?
Would an independent garage normally be able to fix the exhaust clamp? Must be cheaper than a whole new exhaust?
|
kev1975 Trade Member
| Joined: | Wed Sep 5th, 2007 |
| Location: | |
| Posts: | 755 |
| Status: |
Offline
|
| Mana: |     |
|
Posted: Wed Feb 24th, 2010 08:09 pm |
|
psychocandy wrote:
Took car to Kwikfit for MOT (probably not best idea).
Failed for a few things:-
1. Headlight not secured. I know one of the fixings for the headlight
is broken but are they being overpicky here. Its definitely not loose
because 4 out of 5 bolts are still holding it.
2. Exhaust mountings. They are saying the bit that hangs on to the
rubbers has snapped off.and I need whole new exhaust. Can this be
repaired/welded or something?
I'm seriously thinking of going somewhere else and paying for another
MOT as a second opinion.
make a bracket to secure the headlight , job sorted .
exhaust bracket can be repaired any way you like as long as it is secure & supports the system , even a piece of bar fastened to the exhaust with an exhaust clamp will be fine as long as it is secure .
|
psychocandy Member
| Joined: | Wed Feb 24th, 2010 |
| Location: | |
| Posts: | 6 |
| Status: |
Offline
|
| Mana: |     |
|
Posted: Wed Feb 24th, 2010 07:33 pm |
|
Took car to Kwikfit for MOT (probably not best idea).
Failed for a few things:-
1. Headlight not secured. I know one of the fixings for the headlight
is broken but are they being overpicky here. Its definitely not loose
because 4 out of 5 bolts are still holding it.
2. Exhaust mountings. They are saying the bit that hangs on to the
rubbers has snapped off.and I need whole new exhaust. Can this be
repaired/welded or something?
I'm seriously thinking of going somewhere else and paying for another
MOT as a second opinion.
|
 Current time is 01:21 pm | |
|