| Author | Post |
|---|
Hoge
Member
| Joined: | Sat Jul 10th, 2010 |
| Location: | |
| Posts: | 11 |
| Status: |
Offline
|
| Mana: |    |
|
Posted: Thu Nov 10th, 2011 06:50 pm |
|
goldenboy wrote: kenada wrote:
I understand you will fail if you only have one rear footpeg, but both or none will pass.
you understand incorrectly.
|
goldenboy
Member
| Joined: | Thu Nov 10th, 2011 |
| Location: | |
| Posts: | 1 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Nov 10th, 2011 01:39 pm |
|
kenada wrote: Do these need to be on for the mot?
Also do dents in tanks affect the mot?
I understand you will fail if you only have one rear footpeg, but both or none will pass.
Once upon a time in my dirty past, i had to put dents in the tank to pass the MOT. I had fitted racing handlebars and they were fouling the tank 
Last edited on Thu Nov 10th, 2011 01:40 pm by goldenboy
|
KevG
Super Moderator
|
Posted: Thu Jan 27th, 2011 10:29 pm |
|
Hi. You said "Dent"
Not" Bad damage"
Kev
|
kenada
Member
| Joined: | Thu Dec 25th, 2008 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Jan 27th, 2011 09:56 pm |
|
yes sorry I should of stated the rear footrest.
regardless of how many dents there are or how sharp they are?
thanks for the fast reply btw
|
KevG
Super Moderator
|
Posted: Thu Jan 27th, 2011 09:25 pm |
|
I imagine you mean rear footrests?
They do not need to be fitted for MOT
Dents in the tank are not a failure.
Hope this helps
Kev
|
kenada
Member
| Joined: | Thu Dec 25th, 2008 |
| Location: | |
| Posts: | 4 |
| Status: |
Offline
|
| Mana: | |
|
Posted: Thu Jan 27th, 2011 08:17 pm |
|
Do these need to be on for the mot? I have a rear seat cowl fitted instead of a pillion seat and my exhaust is support by an aftermarket exhaust hanger.
Also do dents in tanks affect the mot?
Last edited on Thu Jan 27th, 2011 08:20 pm by kenada
|
Current time is 10:37 pm | |
|
