View single post by
 Posted: Tue Nov 8th, 2011 10:53 pm
PM Quote Reply Full Topic


Joined: Fri Jun 24th, 2011
Location: Leeds, United Kingdom
Posts: 52
The ATL brake tester must give you an output pass / fail at the end of the ATL test.

If the VTS device disagrees with the brake tester and says FAIL it must either a) be a marginal pass or b) you havent used the 'as presented' weights for the data entry to the device and selected 'kerb weight' or c) the brake tester is poorly or improperly calibrated.

Hope this helps...