View single post by Paul S
 Posted: Wed Oct 27th, 2021 07:43 pm
PM Quote Reply Full Topic
Paul S

Joined: Mon Aug 17th, 2015
Location: Wanted
Posts: 424
Hi and welcome to the forum,

Am a class 4 tester & your question is for class 1,2 & 3 so its the thought that counts..

At the time of test the high beams or both low beams will have to work when switched. Moving the dip switch must extinguish all main beam headlamps & deflect the main beams to make them dipped beams if one headlamp is fitted it must dip
if 2 are fitted, either both must dip or one must dip and the other switch off
Cant find reference in the inspection manual to the 'PASS' momentary switch but reading the above wouldn't of thought its a problem.

Please let us know the outcome of the test,