Moderated by: Stealth, MOTman, KevG, bimmer |
|
calibration | Rate Topic |
Author | Post |
---|
Posted: Thu Aug 20th, 2009 07:22 pm |
|
1st Post |
relisys Member
![]() |
Thanks for the info. I have been using Globeaid but intend to put a stop to that. My kit is from the trademaster range and I think Globeaid to all their calibrations
|
||||||||||||||
|
Posted: Thu Aug 20th, 2009 08:03 am |
|
2nd Post |
Dynamic Balance Guest
![]() |
Whoever you finally choose, make sure they are competent to do the job to the required standard? Our local company can't even install the beam tester tracks straight, get them back they still can't do it? Calibrations, forget it, they admit they are not qualifed and have not been trained to do it? Whatever you do don't use CCS unless you want poor quality workmanship ![]() DB ![]()
|
|||||||||||||
|
Posted: Thu Aug 20th, 2009 07:33 am |
|
3rd Post |
patester Trade Member ![]()
![]() |
Steve Bicknell,Premier Diagnostics 01257278641. Comes from up your way to calibrate one of mine mate. Never missed me in 15 years....... so far. ![]()
|
||||||||||||||
|
Posted: Wed Aug 19th, 2009 10:08 pm |
|
4th Post |
relisys Member
![]() |
Can any one suggest a decent company for calibratin of MOT equipment in the lancashire / west yorkshire area. the company i have been using failed to show up which resulted in my emissions tester shutting down for the day. Need someone more reliable.
|
|||||||||||||
|
Current time is 07:52 pm | |
MOT Forum - The MOT Testing Forum for the UK MOT Testing Industry > Trade Category (MOT Trade Discussions) > Equipment Forum - Advice on Parts, Service, Performance etc | MOT Forum > calibration | Top |