MOT Forum - The MOT Testing Forum for the UK MOT Testing Industry > Trade Category (MOT Trade Discussions) > Equipment Forum - Advice on Parts, Service, Performance etc | MOT Forum > Bosch BEA850 - remote control not working after calibration
MOT Forum - The MOT Testing Forum for the UK MOT Testing Industry > Trade Category (MOT Trade Discussions) > Equipment Forum - Advice on Parts, Service, Performance etc | MOT Forum > Bosch BEA850 - remote control not working after calibration | |
|
| Moderated by: Stealth, MOTman, KevG, bimmer |
|
||||||||||||||
| Bosch BEA850 - remote control not working after calibration | Rate Topic |
| Author | Post |
|---|
| Posted: Tue Apr 2nd, 2013 06:18 pm |
|
1st Post |
|
markt Member 
|
glad to be of help 
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Apr 2nd, 2013 04:06 pm |
|
2nd Post |
|
Bestgear Member
|
Hi Well thats a beer I owe you Mark! Remote now working as it should be! THANKS!
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Apr 2nd, 2013 09:15 am |
|
3rd Post |
|
markt Member
|
hold f1 and C keys down while pointing at reciever...the light will blink after a short while and all should be ok..
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Mar 30th, 2013 05:40 pm |
|
4th Post |
|
Bestgear Member
|
Hi Markt That would be excellent... heaven knows why the guy did not know to do that on ours. Its a shame that so little knowledge about these systems exists....certainly in the public domain anyway. David
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Mar 30th, 2013 04:07 pm |
|
5th Post |
|
markt Member
|
ours dropped the remote after updating to esi 2 for the diagnostics...there is a pairing procedure to be carried out by pressing 2 buttons on the remote but for the life of me cant remember which ones..will make some enquires about it.
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Mar 27th, 2013 09:36 pm |
|
6th Post |
|
Bestgear Member
|
kit1958 wrote:Why not call back the person who did the calibration ? Yeh... that would work if he played ball... he claims calibration did nothing else to the system. I get that, in as much as it should not affect anything, but in this case...remote no workey after the work... This machine is a real pain, and so little is known about it outside of a service contract... and even if you do have one, it seems that the guys that sell/service them dont really know how they work...they just swap bits... David
|
|||||||||||||
| ||||||||||||||
| Posted: Wed Mar 27th, 2013 08:36 pm |
|
7th Post |
|
kit1958 Trade Member 
|
Why not call back the person who did the calibration ?
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Mar 27th, 2013 07:00 pm |
|
8th Post |
|
Bestgear Member
|
Guys I am back with yet another problem with this damn BEA... The unit was calibrated last week and since then the remote control does not work! If you point the handset at a camera you see the infrared LEDs so its ok. The IR receiver (USB) is connected and you can see it as a HID device in device manager. Does anyone know how to tell the software how to use the remote?!?!? In the installation page with the com ports there are no options for the remote - do I need to set them eslewhere or perhaps in an ini file? Thanks in advance for any advice! David Last edited on Wed Mar 27th, 2013 07:19 pm by Bestgear |
|||||||||||||
| ||||||||||||||
| Current time is 10:59 pm | |
| MOT Forum - The MOT Testing Forum for the UK MOT Testing Industry > Trade Category (MOT Trade Discussions) > Equipment Forum - Advice on Parts, Service, Performance etc | MOT Forum > Bosch BEA850 - remote control not working after calibration | Top |
