|
| Moderated by: Stealth, MOTman, KevG, bimmer |
|
||||||||||||||
| one man testing 2015-2016 ? | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Oct 25th, 2014 04:19 pm |
|
1st Post |
|
aqua87 Member
|
Well no one seems to know, I think its a load of rubbish made up by equipment reps tbh
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Oct 4th, 2014 07:38 pm |
|
2nd Post |
|
aqua87 Member
|
Thanks for the info, but it doesn't answer my question if vosa are going ahead with this ? Considering ? Or any other intention on if this likely to happen. Many thanks lee
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Oct 4th, 2014 07:37 pm |
|
3rd Post |
|
aqua87 Member
|
Thanks for the info, but it doesn't answer my question if vosa are going ahead with this ? Considering ? Or any other intention on if this likely to happen. Many thanks lee
|
||||||||||||||
| |||||||||||||||
| Posted: Fri Oct 3rd, 2014 09:13 pm |
|
4th Post |
|
getech.org.uk Member
|
getech.org.uk wrote: If OPTL / ATL becomes mandatory then all you will need is a lift fitted with play detectors and a pair of convex mirrors + brake pedal depressor. Forgot to mention you probably will lose 2 weeks at least in testing. 1 week for digging out and concrete pour. Concrete needs AT LEAST 1 week before re-installation to ensure concrete has achieved satisfactory strength... Once installed you can start testing immediately BUT ONLY AS 2-MAN until re-authorised...
|
|||||||||||||
| ||||||||||||||
| Posted: Fri Oct 3rd, 2014 09:09 pm |
|
5th Post |
|
getech.org.uk Member
|
If OPTL / ATL becomes mandatory then all you will need is a lift fitted with play detectors and a pair of convex mirrors + brake pedal depressor. Don't forget a VT01 form though before you do anything... More than likely the lift is going to be wider and longer than your existing lift so some groundwork is probably going to be required if the lift is recessed. Assuming this is the case and your station was approved before November 2010 then the distance between the rollers and rear crossbeam of your lift (assuming your in line recessed) will be 1.5m or thereabouts - there is a smaller requirement here now in dimensional terms so it will all squeeze in... Hope that helps... DM me if you need further help...
|
||||||||||||||
| |||||||||||||||
| Posted: Fri Oct 3rd, 2014 08:49 pm |
|
6th Post |
|
aqua87 Member
|
Hi there is there any truth in that dvsa are looking to introduce one man testing for all garages in the year 15-16 ? If so what needs to be upgraded on a standard class 4 mot bay Many thanks lee
|
|||||||||||||
| ||||||||||||||
| Current time is 10:33 am | |
| MOT Forum - The MOT Testing Forum for the UK MOT Testing Industry > Trade Category (MOT Trade Discussions) > Equipment Forum - Advice on Parts, Service, Performance etc | MOT Forum > one man testing 2015-2016 ? | Top |
